Gå till innehåll

Thingleaf

Medlem
  • Innehållsantal

    38
  • Gick med

  • Besökte senast

Inlägg postade av Thingleaf

  1. Det är fortfarande problem med mitt wmp11...

    Det tar minst 10 sekunder att ladda en vanlig mp3fil men upp till 14 sekunder är inte ovanligt.

    Det går fortare mellan låtar när wmp får sköta det själv. Men strax innan den byter låt så hackar den pågående låten cirka 4 gånger.

    det är ingen process som verkar skum eller som tar en massa cpu. samtidigt tycker jag att det skulle va rikigt konstigt, jag menar Quadprocessor! Vad har jag betalat för i så fall? >:(

    Nä, det ända jag kan tänka mig är att det är fel på wmp på nåt sätt. Testat både Songbird och Media player Classic och de tutar på som om de aldrig gjort nåt annat.

    Jag funderar på att testa att ladda ner wmp från microsoft så får vi se. Den version jag kör är den som kom med datorn. Samtidigt säger står det att den är "up to date". Men det kan vara värt ett försök.

    Återkommer...

    ps. Jag skulle ju kunna köra nåt annat program, det finns ju hur många som helst... Men jag gillar faktiskt Wmp! Så innan jag laddar ner itunes vill jag allt testa allt. ds.

  2. Det är mycket möjligt att det är nån process som ligger och tutar. Det brukar vara ca 80 processer i bakgrunden när datorn är igång.

    Men jag tror inte att det är nån som tar exceptionellt mycket cpukraft, ska dock kolla lite noggrannare idag.

    Överhuvudtaget så verkar Wmp11 ganska skumt. Ytterligare konstigheter är att strax innan den byter spår så hackar uppspelningen 4 kanske 5 gånger i jämn takt. Sen går det ett par sekunder innan spåret helt tar slut och den byter spår utan problem eller lagg.

    Kan det vara nån slags bufferfunktion i Wmp11 som ligger och spökar?

    Ska testa att avaktivera virusprogrammet och se om det blir nån skillnad.

  3. Goddagens!

    Satt och pulade med min nya Vistaburk när jag upptäckte nåt (enligt mig) mycket märkligt!

    Överallt där internminnet visas så står det 3Gb eller 3069 Mb eller liknande. Men datorn ska innehålla 4Gb ram och det går inte för allt i världen att se!

    Kontaktade Dell supporten (XPS-varianten) och frågade om det var nåt fel.

    Detta är svaret jag fick!

    Ursäktar redan nu för ett långt svar, men jag tror att det kan vara matnyttigt för gänget här på forumet!

    Hoppas det iallafall! ;D

    Hello Mr Tinglof

    Here is the information about the 4GB issue on Vista

    1)        Summary on Windows Memory Limitation:

    Windows was updated some years ago to reserve a certain amount of memory

    when it has the luxury of 4 gigs of memory to work with: according to

    Microsoft, this was done to make compatibility for hardware drivers

    easier (these drivers are what makes the computer and windows work with

    items like graphics or sound card and some other internal hardware).

    Windows then reports it to you as if the memory it reserved just isn't

    there. If there was nothing else there outside window to reserve memory,

    windows would tell you that you have slightly above 3 gig available.

    If windows doesn't have these 4 gigs to play with, it doesn't reserve

    the memory at all, reports it correctly and just uses memory as it needs

    it.

    What is happening at the same time though, is that your graphics card is

    also reserving memory. The graphics card needs this memory all the time,

    and this happens outside of the 4 gig issue.

    So when you have 4 gigs in, windows takes nearly 1 gig in reserve, and

    the graphics card takes slightly more than a half a gig, leaving you

    with around 2.5 gigs.

    None of this happens at 2 gig or below, as the graphics card does have

    its own limited memory.

    Microsoft do recognise this but there are no fixes for Windows XP, as

    these changes to Windows were made before 4 gigs of ram in a system was

    commonplace or even expected.

    There is a fix for Vista listed below.

    http://technet.microsoft.com/en-us/library/bb457155.aspx

    http://blogs.msdn.com/hiltonl/archive/2007...not-4gb-ram-pro

    blem.aspx

    http://support.microsoft.com/kb/888137/en-us

    2)        Memory Limitation Detail :

    On a system configured with 4 GB of random-access memory (RAM),

    Microsoft® Windows® reports 3.0 to 3.8 GB of available memory. The

    same behavior is seen in Linux and other operating systems, as this is a

    limitation of 32-bit addressing used in IA-32 systems.

    <<Picture (Device Independent Bitmap)>>        NOTE:        At this time,

    Dell portable systems reserve 1 GB of memory for input/output (I/O)

    space in the basic input/output system (BIOS), making the total memory

    available 3,000 MB, which equals 3 GB. This is set in the BIOS and

    cannot be changed by the user.       

    This is a limitation of a 32-bit architecture. The system can only

    address 4 GB of allocated memory. Allocated memory is made up of

    physical RAM, and any I/O space needed by devices. The way memory is

    allocated is that starting at 4 GB, the system allocates device I/O

    addresses working its way down. Normally this is not a problem, but when

    systems have 4 GB of physical memory, the addresses needed to address

    RAM overlap the space needed for I/O. In this case, the need for I/O

    space takes precedence, and the amount of RAM visible to the operating

    system and applications is limited to 4 GB minus I/O space. Examples of

    devices that consume I/O space are:

    *        System BIOS

    *        PCI Express configuration space and memory for PCI Express

    device(s)

    *        Memory mappy I/O

    *        Motherboard Resources (I/OxAPIC)

    *        Chipset

    *        PCI Enumeration

    For example: If you have 4GB of system memory, an Intel 915g Express

    chipset, Windows XP with Service Pack 2, and a PCI Express graphics card

    the remaining system memory as reported by System Information would be

    ~3.25GB. The same configuration but with 2GB of system memory would

    result in all 2GB being available. This is due to the limited capability

    of memory mapping (or limited amount of addresses) on 32-bit

    architecture systems.

    <<Picture (Device Independent Bitmap)>>        NOTE:        Server systems

    are able to extend the address space with physical address extension

    (PAE) . This option is not available on desktop and workstation systems.

    3)        Fix for Vista Below:

    Enable support for 4GB of RAM (or more) in Vista 32-bit

    On a computer that has 4 GB of RAM, the System Properties dialog box and

    the System Information dialog box may report less memory than you

    expect. This problem occurs because the address space is limited to 4 GB

    in a 32-bit hardware environment. Memory may be relocated to make room

    for addresses that the basic input/output system (BIOS) reserves for

    hardware. However, because of this limitation, Windows Vista cannot

    access memory that is relocated above the 4 GB boundary.

    Solution: Open an elevated Command Prompt, type BCDEdit /set pae

    ForceEnable and press Enter.

    The pae parameter enables Physical Address Extension (PAE). On 32-bit

    versions of Windows, PAE is disabled by default. PAE is an addressing

    strategy that uses a page-translation hierarchy to enable systems with

    32-bit addressing to address more than 4 GB of physical memory. PAE also

    supports several advanced system and processor features, such as Data

    Execution Prevention (DEP; "No execute"), Non-Uniform Memory

    Architecture (NUMA), and hot-add memory, so it is also used on computers

    with less than 4 GB of memory. PAE must be supported by the processor.

    On a computer that supports hardware-enabled Data Execution Prevention

    (DEP), PAE is automatically enabled when DEP is enabled and

    automatically disabled when you disable DEP. To enable PAE when DEP is

    disabled, you must enable PAE explicitly: Open an elevated Command

    Prompt.

    Type BCDEdit /set nx AlwaysOff & BCDEdit /set pae ForceEnable and press

    Enter.

    Thanks,

    Regards

    Karl Payne

    XPS Support Specialist

    Där ser man!

  4. Varför skulle man banta ner? (Ärlig fråga)

    7. Ta bort spel, bakgrundsbilder, Teman, Papperskorgen, Temporära Internetfiler, Temp-filer i Windows strukturen, alla drivrutinfiler som man inte använder..................  :-

    Man får säkert tillbaka 5-6 GB diskyta !

    Jag ser att man kan få en snabb 1 000 GB disk nu för 2500:-  ::)

    ;D ;D ;D ;D ;D

    8. Ta bort datorn från skrivbordet. Köp skrivmaskin och miniräknare. ;D

  5. Ja, det är något som det faktiskt är. Har aldrig sett en blåskärm eller att det totaltlåst sig. Så den biten funkar i varje fall och tur det för den används ofta.  ;)

    Haha, det är ju bra att den biten funkar bra iallafall.

    Var alltid störd på Xp när det totalfrös och har hoppats rätt mycket på Vista.

  6. Hej allesammans!

    Kommer få Vista om ett par veckor och tänkte läsa på mig om funktioner och annat.

    Försöker få lite klarhet över alla väntelägen och nerstängningsalternativ i Vista.

    Som jag hittills förstått det så rekommenderar Microsoft att man använder läget "Sleep" vilket är en blandning av viloläge och hibernate.

    Detta för att dator startar snabbare samtidigt som man sparar energi (om man inte stänger av den helt vill säga).

    Är det någon som använder det läget regelbundet och tycker att det är bättre än att bara stänga av datorn?

    Det jag hört är ju att man sliter onödigt mycket på datorn genom att starta och stänga av den varje dag, men är det verkligen så? Och ska man i så fall köra "Sleep" istället för att spara datorn onödigt lidande?

    Vad är era erfarenheter?

×
×
  • Skapa nytt...